|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
S/TRI/SVT867994/D/13/05/2002 page 1 / 3 F/GB Relais Statique Triphase Three Phase Solid State Relays * Sortie AC Synchrone. / Pilotage de tout type de charge . * Commande 90-240VAC/DC - LED * IP20 - protection par reseau RC et VDR * Technologie thyristors * Zero cross AC output . / Designed for all type of load. * 90-240VAC/DC control voltage - LED * IP20 - RC and VDR protection * Thyristors technology Dimensions / Dimensions: 82,7 19 4,4 19 SVT867994 24 to 520 VAC - 75 ARMS* Circuit equivalent/Equivalent circuit : L1/R M4 Adaptateur / Adapter LED U L2/S A1 56,5 58,4 23 40 76 = A2 Adaptateur / Adapter M3,5 V L3/T 91 100 Adaptateur / Adapter W Caracteristiques de commande (a 20C) / Control characteristics (at 20C) Parametre / Parameter Tension de commande / Control voltage Courant de commande / Control current (@ Uc ) Tension de relachement/Release voltage Resistance interne / Input internal resistor fig.1 Symbol Uc Ic Uc off Rc Min 90 3 AC Nom 12 fig. 1 :Caracteristique d'entree / Control characteristic fig1 : Caracteristique d'entree / Control characteristic Ic (mA) Max 240 11 15 21k Unit V mA V K 9 6 3 Caracteristiques d'entree-sortie (a 20C) / Input-output characteristics (at 20C) Isolement entree-sortie/Input-output isolation @500m Ui 4000 Isolement sortie-semelle/Output-case isolation @500m Ui 3300 Tension assignee isolement/Rated impulse voltage Uimp 4000 Caracteristiques generales / General characteristics Parametre / Parameter Poids/Weight Plage de temperature de stockage / Storage temperature range Plage de temperature de fonctionnement/Operating temperature range VRMS VRMS V 0 0 20 40 60 8 0 100 120 140 160 180 200 220 240 Uc (V) Conditions Symbol Typ. 410 -40 / +100 -40 / +100 Unit g C C Proud to serve you All technical caracteristics are subject to change without previous notice. Caracteristiques sujettes a modifications sans preavis. celduc r e l a i s S/TRI/SVT867994/D/13/05/2002 page 2 / 3 F/GB Caracteristiques de sortie(a 20C) / Output characteristics (at 20C) Parametre / Parameter Tension de charge / Load voltage Plage tension de fonctionnement / Operating range Tension crete / Peak voltage Niveau de synchonisation / Synchronizing level Tension d'amorcage / Latching voltage Courant nominal AC-51/ AC-51 nominal current Courant nominal AC-53/ AC-53 nominal current Courant de surcharge non repetitif /Non repetitive overload current Chute tension directe crete/ On state voltage drop Courant de fuite etat bloque/ Off state leakage current Courant de charge minimum / Minimum load current Temps de fermeture/ Turn on time Temps d'ouverture/ Turn off time Plage de frequence / Operating frequency range dv/dt etat bloque / Off state dv/dt dI/dt maximum non repetitif/ Maximum di/dt non repetitive I2t (<10ms) EMC Test d'immunite conduite / Conducted immunity level EMC Test d'immunite conduite / Conducted immunity level Conformite / Conformity fig 2 : Caracteristiques thermiques / thermal curves : 300 280 260 240 Total wasted power (W) 220 200 180 160 140 120 100 80 60 40 20 0 0 10 20 30 40 50 60 RMS load current (A) 70 80 0 0,95K/W 0,55K/W Conditions ( 480Vrms + 10% ) Ie nom ( see Fig. 2 ) ( see Fig. 2 ) tp=10ms (Fig. 3) @ Ie nom @Ue, 50Hz Uc nom AC ,f=50Hz Uc nom AC ,f=50Hz Symbol Ue Uemax Up Usync Ua Ie AC-51 Ie AC-53 Itsm Vd Ilk Ie min ton max toff max f dv/dt di/dt I2t IEC 1000-4-4 (burst) IEC 1000-4-5(schocks) EN60947-4-x Typ. 400 530 1200 12 10 75(*) 16 1000 1,35 <5 5 30 30 10-440 500 50 5000 4KV crit A 4KV crit A Unit V rms V rms V V V A rms A rms A V mA mA ms ms Hz V/s A/s A2s * Limited @ 50A by the connections Limite a 50A par les connexions Pour un fonctionnement permanent : For a permanent current. Courbes Puissance dissipee (Pd) = f(I) Power dissipation ( Pd) = f(I) Choix dissipateur thermique en fonction de la puissance dissipee et de la temperature ambiante maxi./Heatsink choice depending on Pd and ambient temperature. 0,3K/W 1,2K/W without heatsink 0 10 20 30 40 50 60 70 80 90 100 Ambient temperature (C) Fig.3 Surcharge de courant : Itsm (Apeak) = f(t) pour modele 75A(Itsm=1000A) Surge current : Itsm (Apeak) = f(t) for 75A models with Itsm =1000A 1500 Itsm (Apeak) 1 -Itsm non repetitif sans tension reappliquee est donne pour la determination des protections. No repetitive Itsm is given without voltage reapplied for the determination of the protection. 2 -Itsm repetitif est donne pour des surcharges de courant (Tj initiale=70C). La repetition de ces surcharges de courant diminue la duree de vie du Relais. Repetitive Itsm is given for inrush current with initial Tj = 70C. The repetition of the surge current decrease the lifetime SSR's . 1000 Surcharge de courant non repetitive sans tension reappliquee / No repetive surge current without voltage reapplied. Surcharge de courant repetitive avec tension reappliquee Repetive surge current with voltage reapplied. 500 0 0,01 0,1 t (s) 1 10 Precautions : * Les relais a semiconducteurs ne procurent pas d'isolation galvanique entre le reseau et la charge. Cautions : * Semiconductor relays don't provide any galvanic insulation between the load and the mains. Proud to serve you All technical caracteristics are subject to change without previous notice. Caracteristiques sujettes a modifications sans preavis. celduc r e l a i s S/TRI/SVT867994/D/13/05/2002 page 3 / 3 F/GB SVT 1 Cablage commande / Wiring of the control circuit: nombre de fils/ NUMBER OF WIRES 2 SCREWDRIVER TYPE tournevis tournevis MINIMUM TORQUE couple serrage SOLID FINE STRANDED SOLID FINE STRANDED (No ferrule) (With ferrule) (No ferrule) (With ferrule) rigide sans embout multibrins avec rigide sans embout multibrins avec embouts embouts N.m 0,75 ... 2,5 mm2 0,75 ... 2,5 mm2 0,75 ... 2,5 mm2 0,75 ... 2,5 mm2 0,8 x 5,5 mm POZIDRIV 2 1,2 SVT 1 Cablage puissance / Wiring of the power circuit: NUMBER OF WIRES 2 SCREWDRIVER TYPE tournevis tournevis MINIMUM TORQUE couple serrage SOLID FINE STRANDED SOLID FINE STRANDED (No ferrule) (With ferrule) (No ferrule) (With ferrule) rigide sans embout multibrins avec rigide sans embout multibrins avec embouts embouts N.m 1,5 ... 10 mm2 1,5 ... 6 mm2 1,5 ... 10 mm2 1,5 ... 6 mm2 0,8 x 5,5 mm POZIDRIV 2 1,8 Graisse thermique/ thermal grease R S T R S T R S T Resistive or inductive load M Montage/ Mounting Application typique /Typical application: celduc r e l a i s www.celduc.com Rue Ampere B.P. 4 42290 SORBIERS - FRANCE E-Mail : celduc-relais@celduc.com Fax +33 (0) 4 77 53 85 51 Service Commercial France Tel. : +33 (0) 4 77 53 90 20 Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21 Sales Dept. Asia : Tel. +33 (0) 4 77 53 90 19 |
Price & Availability of SVT867994 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |